Installing Proxidize

Table of Contents

Once you have the hardware set up, you need to install Proxidize. This process is very simple. all you need to do is:

Installing Proxidize Next-Gen Premium Versions #

Open a terminal window on your host device
Run the command:
- “sudo rm ./prepare;wget arm.pxfile.com/prepare;sudo bash ./prepare“
Wait for your host device to reboot and once it’s booted, open a new terminal window.
Install Proxidize Next-Gen based on your Proxidize host machine you are using one of the below commands:
1. Proxidize ALX-2.0 MicroServer or Proxidize Box:
  - sudo rm install; wget arm64.pxfile.com/ng/install; sudo chmod +x install; sudo ./install
2. Raspberry Pi 4:B
  - sudo rm install; wget arm.pxfile.com/ng/install; sudo chmod +x install; sudo ./install
3. PC/Server with Ubuntu 20.04:
  - sudo rm install; wget x86.pxfile.com/ng/install; sudo chmod +x install; sudo ./install
Once done, a browser should open with the Proxidize interface. The login is admin:admin
You can open a browser manually with the address http://localhost

Open a terminal window on your host device
Run the command:
- “sudo rm ./prepare;wget arm.pxfile.com/prepare;sudo bash ./prepare“
Wait for your host device to reboot and once it’s booted, open a new terminal window.
Install Proxidize Next-Gen based on your Proxidize host machine you are using one of the below commands:
- Proxidize ALX-2.0 MicroServer or Proxidize Box:
  - sudo rm install; wget arm64.pxfile.com/free/install; sudo chmod +x install; sudo ./install
- Raspberry Pi 4:
  - sudo rm install; wget arm.pxfile.com/free/install; sudo chmod +x install; sudo ./install
- PC/Server with Ubuntu 20.04:
  - sudo rm install; wget x86.pxfile.com/free/install; sudo chmod +x install; sudo ./install
Once done, a browser should open with the Proxidize interface. The login is admin:admin
You can open a browser manually with the address http://localhost

If you don’t have the hardware, you can order it from https://proxidize.com/hardware/